lgtv_audio_cap/docs/configuration.md

Configuration and the Luna API

Everything the UI does goes through the service's Luna API, so anything the UI can do you can also do from an ssh session with luna-send.

Where the settings live

/var/lib/webosbrew/audiocap/config.json     when the service can write there
/tmp/audiocap-config.json                   fallback, lost on reboot
$AUDIOCAP_CONFIG                            overrides both

The service falls back to /tmp when it is not running as root, and the UI says so under System → Settings file. Settings written there survive the session but not the TV.

Edits are merged, not replaced: sending {"hyperhdr":{"port":5005}} changes the port and leaves everything else alone. Writes are atomic — a temporary file, fsync, rename — so a power cut during a save cannot leave a truncated config behind.

Settings

Top level

Key	Default	Meaning
autoStart	false	start capturing as soon as the service starts
logLevel	"info"	error, warn, info or debug
sinks	["hyperhdr"]	which outputs to open

autoStart only matters if something starts the service at boot — that is what the Start on boot toggle installs, a script in /var/lib/webosbrew/init.d/ that pokes the service so the Homebrew Channel launches it.

capture

Key	Default	Meaning
backend	"auto"	auto, pulse, alsa, exec or tone
device	""	PulseAudio source, or an ALSA PCM like hw:0,0
server	""	PulseAudio server address; blank autodetects
command	""	for the exec backend
rate	48000	44100 or 48000
channels	2	1 or 2

auto tries PulseAudio, then ALSA. It never tries exec — that one needs a command only you can supply.

The backends:

id	Name	Notes
pulse	PulseAudio monitor	records the monitor source of the active sink; libpulse.so.0 is dlopened at run time, so a TV without it simply reports the backend unavailable
alsa	ALSA PCM	same arrangement with libasound.so.2
exec	External command	runs a command and reads raw interleaved S16LE from its stdout, e.g. arecord -D hw:0,0 -f S16_LE -r 48000 -c 2 -t raw
tone	Test tone	a sweep; proves the network path without touching the TV's audio at all

dsp

Key	Default	Meaning
attack	0.6	seconds for the reported level to catch a rise
release	0.12	seconds for it to fall away

These shape the numbers in the status document and the on-TV visualiser. They do not touch the audio sent to any sink.

hyperhdr — RTP/L16 audio

Key	Default	Meaning
host	""	the receiving machine
port	5004	UDP port
multicast	false	send to a group instead of a host
multicastTtl	4	hop limit when multicasting
sapAnnounce	true	announce over SAP so PulseAudio can find the stream

Payload type 96, 16-bit big-endian PCM, packets kept under 1400 bytes of payload so nothing fragments on a normal Ethernet MTU.

hyperhdrViz — Flatbuffers images

Key	Default	Meaning
host	""	HyperHDR's address
port	19400	Flatbuffers port
priority	150	HyperHDR priority; lower wins
width / height	64 / 36	image size
fps	30	frames per second
mode	"spectrum"	spectrum, level or pulse
saturation	1.0	colour intensity
minBrightness	0.02	floor so the lights never go fully black

hyperhdrAdjust — brightness only, via HyperHDR's JSON-RPC

Sends no image at all. Instead it calls HyperHDR's adjustment command — a post-processing stage that scales output brightness regardless of which priority is currently active — so an existing grabber or effect keeps deciding colour and only overall brightness reacts to sound.

Key	Default	Meaning
host	""	HyperHDR's address
port	19444	HyperHDR's classic JSON-RPC port (not 8090, not 19400)
level	"rms"	rms (steadier) or peak (punchier)
minScale	0.3	brightness during silence; 1.0 is HyperHDR's normal level
maxScale	1.3	brightness at full level; HyperHDR accepts up to 2.0

udp, tcp, http

Key	Default	Meaning
udp.host	""	destination; a host, a multicast group, or 255.255.255.255
udp.port	4010
udp.multicastTtl	4
tcp.port	4011	the TV listens on this
tcp.maxClients	4
http.port	4012	/audio.wav and /audio.raw
http.maxClients	4

All three carry interleaved S16LE — little-endian, unlike the RTP sink, because that is what everything reading a raw pipe expects.

---

The Luna API

Service name org.webosbrew.audiocap.service, all methods on /.

luna-send -n 1 -f luna://org.webosbrew.audiocap.service/getStatus '{}'

Method	Payload	Reply
start	optional settings patch, applied and saved first	the status document
stop	{}	the status document
getStatus	{"subscribe":true} for a feed every 100 ms	the status document
isRunning	{}	{isRunning, state}
getConfig	{}	{path, persistent, settings}
setConfig	a patch, bare or under settings	{saved, restartRequired, settings}
resetConfig	{}	{saved, settings}
listBackends	{}	{backends:[{id,name,description,available}]}
listSinks	{}	{sinks:[{id,name,description}]}
getDiagnostics	{}	{backends, system} — see below
getLogs	{"clear":true} optional	{logs}
quit	{}	ends the process; the next call starts a new one

setConfig reports restartRequired: true when the capture is running, because most settings are read when a run starts.

The status document

{
  "returnValue": true,
  "state": "running",
  "running": true,
  "error": null,
  "capture": {
    "backend": "pulse",
    "backendName": "PulseAudio monitor",
    "device": "…monitor",
    "rate": 48000,
    "channels": 2,
    "frames": 4915200,
    "blocks": 9600,
    "timeouts": 0,
    "uptimeMs": 102400
  },
  "levels": {
    "peak": 0.42, "rms": 0.19,
    "peakDb": -7.5, "rmsDb": -14.4,
    "clipping": false,
    "bands": [0.0, "…16 values…"]
  },
  "sinks": [
    { "id": "hyperhdr", "ok": true, "name": "HyperHDR audio (RTP)",
      "error": null, "target": "192.168.1.50", "port": 5004,
      "packetsSent": 12345, "bytesSent": 4321000, "sendErrors": 0 }
  ],
  "configPath": "/var/lib/webosbrew/audiocap/config.json",
  "configPersistent": true
}

state is stopped, starting, running or error. A sink that failed to open reports ok: false and an error, and the run continues without it — one broken output does not take the others down.

Each sink adds its own fields. packetsSent/bytesSent/sendErrors for the datagram sinks, clients/droppedBytes for the stream servers, connected/registered/framesSent/connectFailures/lastError for the visualiser, connected/updatesSent/minScale/maxScale/lastError for the brightness sink.

Diagnostics

{
  "backends": [{ "id": "pulse", "name": "…", "available": false }],
  "system": {
    "root": true,
    "uid": 0,
    "libraries": { "libpulse.so.0": "/usr/lib/libpulse.so.0",
                   "libasound.so.2": null },
    "binaries": { "parec": false, "pactl": true },
    "pulseSockets": ["/var/run/pulse/native"],
    "pactlSources": "…",
    "alsaCards": ["0 [Loopback]: …"],
    "alsaCapturePcms": ["00-01: …"]
  }
}

This is the fastest way to find out why a backend reports itself unavailable. tools/tv-probe.sh collects the same picture from a shell, plus a few things the service does not look at.

Doing it from a shell

# change settings and start in one call (the patch is saved, like setConfig)
luna-send -n 1 -f luna://org.webosbrew.audiocap.service/start \
  '{"capture":{"backend":"tone"},"sinks":["http"]}'

# point the RTP sink somewhere else and keep it
luna-send -n 1 -f luna://org.webosbrew.audiocap.service/setConfig \
  '{"settings":{"hyperhdr":{"host":"192.168.1.50"}}}'

# watch the level
luna-send -i -f luna://org.webosbrew.audiocap.service/getStatus '{"subscribe":true}'

# what went wrong
luna-send -n 1 -f luna://org.webosbrew.audiocap.service/getLogs '{}'